Paper and Packaging Testing Equipment

Box Compression Testing Machine is to determine the resistance of the box to vertically applied compressive loads during transit and storage. The ultimate test for determining overall quality and performance of the packages.

Specification:

• Machine is microprocessor based Digital Model.
• Single push button operation for conducting test.
• Peak load value latching facility.
• Overload protection
• Load Capacity: 500 kg up to 5000 kg
• Platform Size: 250 mm, 500 mm, 1000 mm & 1500 mm Square.
• Height capacity from 500mm up to 2000mm.
• Suitable to test as per : IS: 7028 (Part VI) – 1973 IS: 7028 (Part IX) – 1975 TAPPI: T-805-om-89 ASTM: D 642 – 90 FCBM: 14:96

Additional Information:

• Item Code: FMBCT
• Minimum Order Quantity: 1 Piece

Product Details:

Bursting Strength Tester indicates bursting strength in kg/ sq.cms of paper, paperboards, corrugated boards and boxes, solid fiberboard, filter cloth, industrial fabrics, plastics, foils, laminates etc. Available with single or double pressure gauge to test the material of low as well as high ranges in a wide capacity from 0-70 kg/cm2. Machine is as per IS:1060 (Part I)-1966, TAPPI :T807-os-75 & TAPPI:T810-su-66.

Specification:

• Weight: 70 kg
• Size: 445 x 425 x 525 mm
• Accuracy: ±0.5%
  

Additional Information:

• Item Code: FM-BST

COBB Tester Equipment to find out the water absorption/penetration (Cobb value) absorbed by one side surface of the specimen. The machine is as per IS:13228-1991.

Specification:

• Weight: 30 kg
• Cylinder Height: 50 mm
• Dimension: 430 mm × 270 mm × 250 mm

Additional Information:

• Item Code: FM-CBT
• Minimum Order Quantity: 1 Unit

As an ace manufacturer and supplier of FM GSM D Tester, we have marked our name very strongly in the market. A variety of tests like Tension, Compression, and Transverse and so on are conducted with this machine. This is motorised machine having automatic loading/unloading cycle suitable for production testing. The machine body is having a taper front look and a large size read-out in the front. The machine is powder coated for a better look. The paint shade does not fade and the machine looks like new over a long period of time.

Features:

• Automatic weight selection by thumb wheel
• Variety of capacities
• Correct loading accuracy

Other Details:

• Direct display of GSM on LED screen
• Very Simple to operate
• 6 sample size measurement - 5 x 5, 10 x 10, 10 x 20, 20 x 20, 20 x 25, 25 x 25 cms
• Accurate and air free breeze shield
• Two cutting templates supplied with the instrument
• Other size templates at extra cost

Additional Information:

• Item Code: FM-GSM
• Minimum Order Quantity: 1 Piece

Specification:

• Direct reading of grammage/GSM on scale
• Precise and reliable
• Very simple to operate
• Range - 0-250 and 0-500 g.s.m.
• 2 Sample size measurement -10x10 and 20x20 cms
• Sturdy in construction, solid metal base with aluminium body, precisely machined
• Factory calibrated pendulum assembly
• Levelling bolt for zero adjustment of the pendulum

Additional Information:

• Item Code: GSM
• Minimum Order Quantity: 1 Unit

Specification:

• Direct display of GSM on LED screen
• Very Simple to operate
• 6 sample size measurement: 5x5, 10x10, 10x20, 20x20, 20x25, 25x25 cms
• Accurate and air free breeze shield
• Two cutting templates supplied with the instrument
• Other size templates at extra cost

Additional Information:

• Item Code: FM-GSM-D
• Minimum Order Quantity: 1 Piece

Drop Tester equipment is very useful to ascertain the transport worthiness of corrugated and solid fiberboard boxes and shipping container. Supplied with angular drop arrangement to ascertain the transport worthiness of the package from all angles. The machine is as per IS:7028 (Part IV)-1973.

Specification:

• Power: AC 220 V/50 Hz
• Drop Height: 400-1300 mm
• Pressure: 0.5 Mpa

Additional Information:

• Item Code: FM-DT
• Minimum Order Quantity: 1 Unit

Thickness Gauge Hand Held is suitable for checking various materials in production control, routine and series test available in different range accuracy and throat as per specification.

Specification:

• Range of dial micrometer: 0-10 mm x 0.01 mm
• Diameter of pressure foot: 10 mm
• Related standards: IS 1060
• ASTM: D 645/D 645M – 96TAPPI: T 411 om -97

Additional Information:

• Minimum Order Quantity: 1 Unit

Thickness Gauge Table Model is most suitable for checking the thickness of Rubber sheet, Fabrics, Leather, Rexine, Paper, Thin Films and all other flexible materials. It provides a maximum compressive load on the specimen to get the exact reading as per I.S. specification.

Specification:

Measuring Capacity: 0-10 mm

Minimum Reading: 0.01 mm

Pressure: 0.3 kPa