Notch Broaching machine suitable for ferrous & non-ferrous material for sample
preparation of ‘ V ’ & ‘ U’ notches for Impact Testing Machine.
Notch Broaching Machine can cut correct ‘ U ‘ & ‘ V ‘ notches in Charpy or Izod specimen by means of a multi-toothed broach.
Manual Notch Cutting Machine:¬ Robustly constructed machine cuts the notches by means of a specially designed multi-toothed broach, which is drawn across the specimen by self -push of rotating hand wheel.
¬ A simple hand-vice for holding the specimen is built on to the machine. The tooling includes the adjustors & end stops necessary to ensure notch-depth & position are correctly set.
¬ The approx.weight is around 35 kg.
¬ The machine dimension (approx.) 210mm X 210mm X 1050mm.
Motorised Notch Cutting Machine:¬ The machine is a free standing unit built sturdily.
¬ The broach is mounted in a carrier, which is drawn by a twin lead screw
mechanism through the full stroke with the help of 0.5 HP motor.
¬ V / U notch Broaching Machine fixture to clamp the specimen. The tooling
includes the vice for holding the 10mm X 10mm specimen. The tooling/ fixtures
include the adjustors & the end stop necessary to ensure the notch depth &
position accurately as per the Standards.
¬ The approx. weight is around 100 kg.
¬ The machine dimension (approx.) 385mm X 385mm X 1050mm.
The machine will broach a notch in 10mm square material to the following standards :* A.S.T.M. A370, E23 * B.S.131:PART I, II, III, IV . BS EN 10045-1993
* DIN 50 115 * IS 1598 1977, IS 1757 1988, IS 1499 1977
